Second generation of the Sekhmet Digital Pressure Gauge.
This Pro model has a 28mm frontplate, .49" OLED Screen, black body, 1/8 BSP thread and has been designed to accurately read and display the air pressure from 15 to 300 bar (218 to 4350 psi), with a maximum deviation percentage of 0.25%. Submerging ratings: 30 minutes max, with a maxim depth of 0.5 metres.
It can display air pressure, shots taken and remaining, last shot air pressure, avg air pressure, temperature.
Suitable for several models of airrifles.
Description:
The Sekhmet Digital Pressure Gauge Pro, has a 28 mm frontplate, black body, 1/8 BSP thread and has been designed to accurately read and display the air pressure from 15 to 300 bar (218 to 4350 psi), with a maximum deviation percentage of 0.25%.
Sekhmet introduced many new upgrades to the the 28 mm Pro Gen II model and they also upgraded the rechargeble battery up to 145% ! This product is the second generation.
The clear .49″ OLED display features a button on the right, top and left, and features an IPX7 waterproof rating: submersion for a maximum of 30 minutes in a maximum depth of 0.5 metres.
This product can be fitted with a carbon cover that Mundilar Airguns also sells.
The gauge can can display the figures below:
• Present amount of air pressure
• Number of shots taken
• Number of shots remaining
• Amount of air pressure used with last shot
• Average amount of air pressure used per shot
• Temperature
Choose between three energy saving modes:
• Sleeping: turns off automatically after a set amount of time, can be turned on with a short touch
• Wake up with the screen off: gauge is always on, but turns on display only after a shot or touch
• Screen always turn on: display is always on
Settings:
• Simple mode: only shows air pressure without other parameters
• Fill/fire wake up: activates display only after a shot or fill
• Screen off time: amount of time after which you want your gauge to turn off the display (0-10 seconds)
• Sleep time: amount of time that expires before gauge goes to ‘sleep’ (0-60 minutes)
• P-minimum: minimum amount of air pressure for your pressurised air reservoir
• Data clear: resets all data such as amount of shots, shots taken, last amount of pressure used and average amount of pressure used
• Rotate screen: rotates the screen by 180°
Other information:
A charging cable is included with the gauge. Before first use please charge the gauge for at least 12 hours
Suitable for 300 bar working pressure. It has a 1/8 BSP treaded bottom connection, what makes it suitable for several models of airrifles.
Check out the general fitting instructions for Sekhmet pressure gauges in the downloads.
Attention: Never exceet the factory adviced fill pressure of your rifle.