Narrow Your Search
(40 products)
BackCharging Equipment for PCP Air Rifles, HILL Pumps, Midland Diving Scuba Tanks.
Hill is well known as the leader in hand pumps that produce dry air for PCP airguns, and now they are expanding into the world of compressors, with the EC-3000.
Gamo Electric compressor, portable all-in-one, up to 300 bars to fill the cylinder of your carbine and / or your PCP pistol. With 220V plug and 12V vehicle.
Featuring our innovative new ‘Jubilee Range’ 300 bar cylinder valve, the Midland Diving Airgun Charging Cylinder range provides everything you need to power your precharged air weapon.
Featuring our innovative new ‘Jubilee Range’ 300 bar cylinder valve, the Midland Diving Airgun Charging Cylinder range provides everything you need to power your precharged air weapon.
Featuring our innovative new ‘Jubilee Range’ 300 bar cylinder valve, the Midland Diving Airgun Charging Cylinder range provides everything you need to power your precharged air weapon.
Featuring our innovative new ‘Jubilee Range’ 300 bar cylinder valve, the Midland Diving Airgun Charging Cylinder range provides everything you need to power your precharged air weapon.
Ultima Fill Line with 1/8″ BSP Female Ends. PVC coated Stainless Steel outer braid with solid 303 Stainless Steel end fittings. 3mm bore.
Heavy duty webbing strap with comfortable moulded rubber handle.
Complete charging device for your scuba tank. FX MKI Fillprobe included
DIN fitting system 50mm gauge, screw bleed and microbore hose with 1/8inch bsp female thread. Everything you need to connect to an existing bottle with a DIN fitting.
DIN fitting system 50mm, screw bleed and microbore hose with 1/8inch bsp female thread. Everything you need to connect to an existing bottle with a DIN fitting.
Fits our MDE bottles and any other bottle with up to 40mm necks.
The new turbopump is equipped with a patented 4 stage system.
Kit with all the seals needed to repair your FX Turbo 4-stage pump.
2-stage high pressure manual pump with load capacity up to 300 bar. It has folding legs.
The updated MK5 Pump by Hill gives you more pressure with less effort than the older model thanks to its totally redesigned internal valving. It may look the same, but it gets you to 4500 psi/310 bar faster and easier than before, which is key for some of the newer high pressure guns.
Keep the moisture out of your gun's air reservoir! Moisture causes rust and can compromise the integrity of your tank. The Dry-Pac unit is a must have for maintaining your PCP airgun!
Never use petroleum-based products on your hand pump. Use only silicone grease. Hill's silicone grease is NLGI 2, which is ideal for keeping your hand pump in good working condition.
Contains all of the parts required to thoroughly service your Hill MK5 PCP pump.
Contains contains the main O-rings to service your Hill MK4 PCP pump.
Contains all of the parts required to thoroughly service your Hill MK4 PCP pump.
Contains contains the main O-rings to service your Hill MK3 PCP pump.
BEST Fittings Quick Coupler starter kits offer a high quality cost effective, slim line solution enabling the quick and easy change over from one filling probe to another.
Quick Coupler Socket QC02 incorporating a simple flow restrictor device. Suits our QC03 Plug, High Pressure Fill Valve, Daystate, Benjamin, Brocock, Crosman, Logun Eagle, PCR1, Ripley most HPA Paintball & Air Soft Tank side fill nipples & other compatible fill couplers.
Add more fill probes to your starter kit, BEST Fittings QC02 Coupler or compatible Foster type coupling. Quality Stainless Steel.
Suits FX Typhoon, T12, Cyclone, Cutlas, Gladiator, Storm, Verminator, Ranchero.
Suits all Airgun Technology models, Vulcan, Vulcan 2, Uragan.
Fill Probe Connector compatible with GAMO PCP airguns and some BSA models
For filling equipment with a 232BAR male DIN (5 threads) from a flexible fill line. Eg early HW100, Rohm Twinmaster, LG, Walther, Steyr.
The FX Carbon 300cc air cylinder is made of light carbon fibre and has a working pressure of 250 bar. Its own weight is just 385 grams and the length of the air cylinder is 19 cm.
The FX Carbon 480cc air cylinder is made of light carbon fibre and has a working pressure of 250 bar. Its own weight is just 450 grams and the length of the air cylinder is 26,5 cm.
The FX Carbon 580cc air cylinder is made of light carbon fibre and has a working pressure of 250 bar. Its own weight is just 540 grams and the length of the air cylinder is 31 cm.
FX 480 CC 300bar Carbon Air Pressure Bottle for FX Maverick, FX Boss, FX Impact, FX Crown
Allows the use of a 200/232 BAR Filling Adaptor or charging whip in a 300 BAR DIN Female Valve. Ideal for using 232 BAR Filling Adaptors on a 300 BAR Gun Charging Cylinder.
Quick Coupler Socket INOX incorporating a simple flow restrictor device. Suits QC03 Plug, High Pressure Fill Valve, FX, Daystate, Benjamin, Brocock, Crosman, Logun Eagle, PCR1, Ripley most HPA Paintball & Air Soft Tank side fill nipples & other compatible fill couplers.